25 March 2025 Press release From 1 to 3 April 2025, the 19th International Exhibition of Vacuum and Cryogenic Equipment, VacuumTechExpo, will take place in Moscow at the Expocentre. VacuumTechExpo is a significant industry event showcasing the key technological advancements and innovations in equipment from both domestic and international companies involved in the production and supply of vacuum and cryogenic equipment. The official partner of the exhibition is Bauman Moscow State Technical University. The highlight of the exhibition's business programme will be the International Scientific and Technical Conference "Vacuum Engineering, Materials, and Technology", with the Russian Scientific and Technical Vacuum Society named after Academician S.A. Vekshinsky as its partner. This year, particular attention will be given to cryogenic technologies. As part of the business programme, a dedicated thematic section on cryogenic equipment will be presented, featuring 16 presentations. The section has been organised with the involvement of specialists from Bauman Moscow State Technical University. The exhibition will be of interest to managers and specialists from research institutes, representatives of companies in the oil, gas, and energy sectors, engineering, construction, as well as medical, food, aerospace and other industries. Exhibition dates and opening hours for visitors 1 April: 10:00–18:00 2 April: 10:00–18:00 3 April: 10:00–16:00 Venue Moscow, Expocentre, Pavilion 5 (Halls 1, 2, 3), entrance from Krasnopresnenskaya Embankment (South entrance). Venue and opening hours VacuumTechExpo Exhibitors This year, 64 companies from Russia, China, and Belarus will showcase their equipment and technologies at the exhibition. In the "Vacuum Equipment" section, companies such as BLM Synergy, Vacuummash, Katod, Cryosystems Group, Progress, TERMODAT/Control Systems, Thermionic, Electronic and Vacuum Technologies, Erstvak, Scientific Equipment, VLS-Engineering, Intek Analytics, and others will present their products. Cryogenic equipment will be presented by companies like Scientific and technical complex "Cryogenic Technique", Cryotrade Engineering, Cryogenmontazh, Cryosystems Group, Erstvak, and others. The exhibition’s display is annually updated with new exhibitors. This year, 14 companies will present their products for the first time: AKA-Scan, AcademVac, Dana Engineering, Efun Valve Co, East Vacuum, Istpartner, Millab, HFP, Vacuum technologies, ESTO, NPP; ROSNA Engineering, Resource and Service, StratNanoTech, and Tula-Term. The main areas of activity for the debut companies include equipment for microelectronics, thermal vacuum equipment, coating application equipment, vacuum measuring instruments, vacuum system components, and consumables. Exhibitor list Business Programme The exhibition's business programme, in partnership with the Russian Scientific and Technical Vacuum Society named after Academician S.A. Vekshinsky, will feature several industry events. Speakers at the conference will include representatives from professional associations, research institutes, educational institutions, and companies producing vacuum and cryogenic equipment. On 1 April, the International Scientific and Technical Conference "Vacuum Engineering, Materials and Technology" will begin with the following thematic sections: 11:45-14:45 – "Vacuum Technologies and Equipment" 14:45-18:00 – "Cryogenic Equipment and Technologies" On 2 April, the conference will continue with three thematic sections: 10:15-13:00 – "New Technologies for Thin Film Formation. Research Methods. Technological Equipment" 13:15-15:45 – "Nanotechnology and Biotechnology" Business programme On 2 April, from 15:45 to 18:00, there will be a presentation of technologies and equipment from companies participating in the "Best Innovative Product" competition. As part of the competition, companies will present: Vacuummash – "DVP-4400" dual-rotor vacuum pump for creating high vacuum; VLS-Engineering – "SpaceVS-300" thermovacuum chamber for testing in space-like conditions; Dana Engineering – "Fermi" electron-beam deposition unit for optical coatings; East-Glass – Hall ion source without a filament neutraliser; Cryosystems Group – "DSP3" spiral vacuum pump with low capacity for preliminary pumping when working with high-vacuum pumps, as well as for independent air pumping, chemically inert gases, vapours, and vapour-gas mixtures; MDU Plant NPP – pressure-vacuum installation based on a rotary vacuum pump series RAP for creating both vacuum (up to 500 mbar and 900 mbar) and low pressure (up to 1000 mbar); Millab – "CSP 510" vacuum chemical system (8 mbar, 34 l/min); Vacuum Technologies – inverse magnetron vacuum gauge "Sensor One" for measuring pressure in high-vacuum systems; ESTO – plasma-chemical etching system "ESTOHORS 200C L RIE" for the development and implementation of silicon oxide etching process on wafers up to 200 mm in diameter; Progress – "MS-9" helium leak detector for testing by all mass-spectrometric leak-tightness control methods; Optikon – vacuum sensor with cold cathode "DVV-K-01" (diffusion vacuum gauge) and a range of pumps with non-evaporable getter; Pinch – range of vacuum feedthroughs for motion and rotation, positioning systems; SAVTech – "SAVTECH PC" plasma cleaning unit for pre-treatment of surfaces before technological operations, vacuum soldering, photoresist coating, vacuum deposition, bonding, micro-welding; TERMODAT/Control Systems – primary manometric transducers for vacuum meters "Meradat-VIT" to measure absolute pressure in the range from 1.3*10-5 to 1.0*105 Pa (1.0*10-7 – 750 mm Hg) Ferry Vatt – vacuum magnetron sputtering unit "WATT 1500-2Md-I-Sh" for applying transparent conductive coatings and silicon dioxide on sheet glass and heat-treated plates for aviation; HiVac – "TurboHV" high-vacuum pumping stations for oil-free pumping of test volumes down to pressures of no more than 5*10-10 mbar; Electronic and Vacuum Technologies – ultra-high-vacuum manipulator. The award ceremony for the competition winners will take place on 3 April at 11:00 in the conference hall of the exhibition (Pavilion 5, Hall 3). The exhibition can be visited for free by obtaining an electronic ticket with the promo code vacuum2025. There is no limit on the number of tickets per promo code. Get e-ticket